Boiler Installation in Theydon Bois

What's Different in Theydon Bois Homes

• Houses with three or more bathrooms usually need a system boiler with a correctly sized cylinder, or an unvented cylinder, to keep pressure steady when several outlets run at once.
• Unvented cylinders must be fitted and serviced by a G3-qualified engineer, and need an annual check of their safety valves.
• Victorian houses near the green may still have a regular boiler, a cylinder and loft tanks, which can be converted to a sealed system.
• Large houses with long pipe runs can benefit from splitting the heating into zones, so rooms that aren't used aren't heated.
• Hard water makes the system cleanse and inhibitor, and a scale reducer where needed, important for a new boiler's life.

How the Job Runs

1. 1Survey and heat loss calculation to size the boiler correctly
2. 2Removal of any old back boiler, cold water tanks, or cylinder
3. 3New pipework run to the chosen boiler location
4. 4Flue routed and positioned to current regulations
5. 5System cleanse and inhibitor dosing to BS 7593
6. 6Benchmark commissioning checklist completed and signed
7. 7Installation notified through Gas Safe for Building Regulations
8. 8Coordination with a qualified electrician for any new wiring