Leak Detection in Buckhurst Hill

What's Different in Buckhurst Hill Homes

• Victorian houses around Queens Road usually have suspended timber floors, where lifting a board or two is often enough to reach a leak.
• Later houses with solid concrete floors can have heating pipes buried in the screed, where pinpointing the leak first saves digging up more floor than necessary.
• Old lead or galvanised supply pipe in the older streets is more prone to leaking at joints and is often worth replacing once exposed.
• A combi boiler whose pressure keeps dropping without a visible drip usually has a leak somewhere on the heating circuit or a failing pressure relief valve.
• Leaks under en-suites and shower trays in larger houses often show on the ceiling below well away from the actual source.

How the Job Runs

1. 1Visual inspection of accessible pipework and fittings
2. 2Pressure test to confirm whether the system is losing water
3. 3Moisture readings to narrow down the affected area
4. 4Arrange specialist trace-and-access survey if needed
5. 5Open up only the section required to reach the leak
6. 6Repair or replace the faulty joint, pipe, or fitting
7. 7Re-test the repaired section before closing up
8. 8Advise on making good the affected area